LiteBee Drone:bit

From Makerfire
Revision as of 07:14, 12 October 2021 by Rickylone (talk | contribs)
Jump to: navigation, search

Introduction

Drone:bit Kit

The first drone assembled by yourself

C08 main photo.png

The Exciting Drone:bit Kit The micro:bit Drone:bit Kit has successfully combined micro:bit with drones, which has provided another possibility for students to create and explore in the sky. Through your operation, you can give it commands of hovering at a fixed altitude , flying from a waypoint, curvilinear flight, and rolling in the sky etc. even in the classrooms, get your first professional micro:bit Drone:bit Kit now!

C08 features.png

Drone:bit

Optical flow locating, TOF fixing altitude It is a kind of drone in professional grade which is able to hover indoors in a waypoint , with build-in optical flow sensors in high sensitivity and TOF sensors, they help to hover and locate in a more precise way.

DIY fun Assemble by yourself, enjoy the fun from DIY.

Create your infinite artworks through coding Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.

Safe flying The sealed propeller guards give you a safe flying experience.


Assemble.png

  1. Self-assembled Drone

Assembled by yourself and enjoy the fun from DIY

  1. Programmable for More Projects

Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.

  1. 120° Propeller Guards

The sealed propeller guards make sure your drone fly safely.

  1. Available Flight in Classrooms

Drone:bit could fly in the classrooms!

C08 Propeller guard.png

Spcification

Rated Voltage               3.7V
Battery Capacity            800mAh
Charging Voltage            5V
Charging Current            0.8A
Charging Port               Micro-USB
Power Protection            Over Charge/Discharge Protection
Propeller Guards            Support
LED                         5 PCS (one for power indicator, four for status indicator)
Waypoints                   Optical Flow
Fixing Altitude             Barometer + TOF
Micro:bit Programming       Support
2.4G Remote Control Mode    Support
Flying Time                 8min

Case 01: Hovering at A Defined Altitude

Introduction

Program to make the micro:bit Drone:bit Kit take off and hover for 10 seconds, then it lands to the ground.

Products Link

1 x Drone:bit

Picture

摄像头:有效像素800万,视场角68度
视频格式:MP4

飞行电池


容 量:600mAh
电 压:7.4 V
电池类型:Lipo
能 量:4.44 Wh
电池整体重量:42g
充电环境温度:10°C至40°C
最大充电功率:10 W

遥控器


工作频率 :2.4 GHz 至 2.483 GHz
最大信号有效距离:100 m(无干扰、无遮挡)
工作环境温度:5°C至40°C
等效全向辐射功率(EIRP):<=13 dBm
工作电流/电压:50mA @ 4.5V

移动端LiteBee下载

安卓用户可在华为、百度、腾讯和360应用市场搜索LiteBee,苹果用户在APPStore搜索LiteBee,加载应用即可。
打开软件,点击Litebee Wing可以直接进入操控界面;
掌上端操控基于WiFi通信,支持操控和图像传输;连接WiFi:“LiteBee Wing_XXXX”,密码为12345678。

手机界面图
C06app.png

LiteBee Go地址下载

浏览器地址输入 http://www.litebee.com ,在“产品中心”选择“LiteBee Wing”,进入软件下载界面获取LitebeeGo。

安装完成

找到下载的安装包,右键以管理身份运行安装程序。
C06-1.png

C06-2.png

安装过程有杀毒软件,或者系统提示什么不安全,这个是正常,请放心,允许其安装即可。
选择电脑一个默认的位置安装即可,尽可能安装在英文目录下,中文目录软件有时候会出现奇怪问题或者报错。

C06-3.png

LiteBee Wing软件使用

在安装软件过程中会自动安装相关驱动,在编程工具栏“机型”中选择对应的产品,在此选择LiteBee Wing进入到编程界面。
LiteBeeWing编程有两种方式。
其一,通过遥控器编程;
1)遥控器开机;
2)通过micro数据线把遥控器接入到电脑USB端口;
3)点击工具栏中“选择串口”选中识别的端口号(常见端口号COM3),点击“连接遥控”,连接成功将提示“已连接遥控”;
4)遥控器按下中间的“0”开启在线模式;

以上,Litebee Wing开机状态下就可以进行编程操作,如果步骤不正确请按照提示信息操作。

其二,通过WIFI连接编程(要求电脑支持无线网);
1)遥控器开机;
2)电脑搜索无线ID为LiteBee Wing_XXXX的设备;
3)点击工具栏中“连接WIFI”建立电脑与飞机的通信;


关于美国手(MODE2,左手油门)日本手(MODE1 右手油门)的操控切换有两种方式可以切换
其一,通过电脑刷写固件切换操作模式,此方式适用于遥控器固件升级。
1)遥控器关机;
2)通过micro数据线把遥控器接入到电脑USB端口;
3)点击工具栏中“选择串口”选中识别的端口号(常见端口号COM3),此时不要点击连接;
4)点击工具栏中“帮助”选择需要写入的模式固件(美国手(MODE2,左手油门)日本手(MODE1 右手油门));
5)根据提示“先断开USB连接,关闭遥控器,重新接入USB”把USB接入电脑,接入之后进入程序烧录模式;
6)烧录进度条读完提示更新完成,同时遥控器蜂鸣器鸣叫提示。断开USB连接,关闭提示窗口即完成。

装配指引

飞行器装配指引
Zhuzhaung-1.png
Zhuzhaung-2.png
Zhuzhaung-3.png
Zhuzhuang-4.png

飞行控制器简介

飞行器结构介绍
Feijijiegou.png
飞行器灯语介绍
Feijizhishideng.png

遥控器简介

遥控器介绍
Yaokongjiemuian.png
遥控器指引(美国手)
Caokongzhinan.png

LiteBee Wing充电

充电器使用说明
Chongdiancaozuo.png

编程案例

通过编程控制无人机矩形飞行
Juxing.png

拓展案例

LiteBee Wing结构拓展搭建
Tuozhananli.png

常见问题及解决办法

1. 问:电机不转问题?
答:检查电机接线是否可靠;检查电机线是否脱落;桨叶是否过压卡住电机;用手拨动电机检查是否存在较大阻尼,若存在电机已经损坏,需要及时更换电机。

2. 问:不能正常起飞?
答:A2:检查电机安装端子插线;检查电池电量;飞行前请校准飞行器。

3. 问:LiteBee Go编程不能识别遥控器?
答:首次使用需要在LliteBeeGo中安装遥控器驱动,安装完成选择的通讯端口要与设备管理器中识别设备端口保持一致。

4. 问:遥控器怎样从美国手切换日本手?
答:将遥控器通过数据线连接到电脑,在LiteBeeGo软件可以为遥控器下载日本手遥控器程序。

5. 问:编程积木无人机出现高频率射桨?
答:更换新的螺旋桨叶。

6. 问:编程积木无人机还可以负载多少重量?
答:建议在10g以内。

Litebee Wing拓展件

LiteBee Wing 巡线拓展模块说明书

Xun 01.jpg Xun 03.jpg Xun 04.jpg Xun 05.jpg Xun 06.jpg Xun7.png Xun 08.jpg Xun 09.jpg Xun 10.jpg Xun11.png Xun12-1.png Xun14.png

LiteBee Wing 磁吸拓展说明书

Ci 01.jpg Ci 03.jpg Ci 04.jpg Ci 05.jpg Ci 06.jpg Ci 07.jpg Ci 08.jpg Ci 09.jpg Ci 10.jpg Ci 11.jpg Ci 12.jpg Ci 13.jpg Ci 14.jpg Ci 16.jpg

LiteBee Wing 避障说明书

Bi 01.jpg Bi 03.jpg Bi 04.jpg Bi 05.jpg Bi 06.jpg Bi7.png Bi 08.jpg Bi 09.jpg Bi 10.jpg Bi11.png Bi12.png Bi14.png

Drone:bit Kit

The first drone assembled by yourself


C08 main photo.png


The Exciting Drone:bit Kit

The micro:bit Drone:bit Kit has successfully combined micro:bit with drones, which has provided another possibility for students to create and explore in the sky.

:Through your operation, you can give it commands of hovering at a fixed altitude , flying from a waypoint, curvilinear flight, and rolling in the sky etc. even in the classrooms, get your first professional micro:bit Drone:bit Kit now!


C08 features.png

Drone:bit

  • Optical flow locating, TOF fixing altitude
It is a kind of drone in professional grade which is able to hover indoors in a waypoint , with build-in optical flow sensors in high sensitivity and TOF sensors, they help to hover and locate in a more precise way.
  • DIY fun
Assemble by yourself, enjoy the fun from DIY.
  • Create your infinite artworks through coding
Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
  • Safe flying
The sealed propeller guards give you a safe flying experience.


Assemble.png

  1. Self-assembled Drone
Assembled by yourself and enjoy the fun from DIY
  1. Programmable for More Projects
Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
  1. 120° Propeller Guards
The sealed propeller guards make sure your drone fly safely.
  1. Available Flight in Classrooms
Drone:bit could fly in the classrooms!

C08 Propeller guard.png

Spcification

Rated Voltage               3.7V
Battery Capacity            800mAh
Charging Voltage            5V
Charging Current            0.8A
Charging Port               Micro-USB
Power Protection            Over Charge/Discharge Protection
Propeller Guards            Support
LED                         5 PCS (one for power indicator, four for status indicator)
Waypoints                   Optical Flow
Fixing Altitude             Barometer + TOF
Micro:bit Programming       Support
2.4G Remote Control Mode    Support
Flying Time                 8min