LiteBee Drone:bit
Contents
Introduction
Drone:bit Kit
The first drone assembled by yourself
The Exciting Drone:bit Kit The micro:bit Drone:bit Kit has successfully combined micro:bit with drones, which has provided another possibility for students to create and explore in the sky. Through your operation, you can give it commands of hovering at a fixed altitude , flying from a waypoint, curvilinear flight, and rolling in the sky etc. even in the classrooms, get your first professional micro:bit Drone:bit Kit now!
Drone:bit
- Optical flow locating, TOF fixing altitude
It is a kind of drone in professional grade which is able to hover indoors in a waypoint , with build-in optical flow sensors in high sensitivity and TOF sensors, they help to hover and locate in a more precise way.
- DIY fun
Assemble by yourself, enjoy the fun from DIY.
- Create your infinite artworks through coding
Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
- Safe flying
The sealed propeller guards give you a safe flying experience.
- Self-assembled Drone
Assembled by yourself and enjoy the fun from DIY
- Programmable for More Projects
Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
- 120° Propeller Guards
The sealed propeller guards make sure your drone fly safely.
- Available Flight in Classrooms
Drone:bit could fly in the classrooms!
Spcification
Rated Voltage 3.7V Battery Capacity 800mAh Charging Voltage 5V Charging Current 0.8A Charging Port Micro-USB Power Protection Over Charge/Discharge Protection Propeller Guards Support LED 5 PCS (one for power indicator, four for status indicator) Waypoints Optical Flow Fixing Altitude Barometer + TOF Micro:bit Programming Support 2.4G Remote Control Mode Support Flying Time 8min
摄像头：有效像素800万，视场角68度
视频格式:MP4
飞行电池
容 量：600mAh
电 压：7.4 V
电池类型：Lipo
能 量：4.44 Wh
电池整体重量:42g
充电环境温度:10°C至40°C
最大充电功率:10 W
遥控器
工作频率 ：2.4 GHz 至 2.483 GHz
最大信号有效距离：100 m（无干扰、无遮挡）
工作环境温度：5°C至40°C
等效全向辐射功率（EIRP）:<=13 dBm
工作电流/电压:50mA @ 4.5V
移动端LiteBee下载
安卓用户可在华为、百度、腾讯和360应用市场搜索LiteBee，苹果用户在APPStore搜索LiteBee，加载应用即可。
打开软件，点击Litebee Wing可以直接进入操控界面；
掌上端操控基于WiFi通信，支持操控和图像传输；连接WiFi：“LiteBee Wing_XXXX”，密码为12345678。
手机界面图
LiteBee Go地址下载
浏览器地址输入 http://www.litebee.com ，在“产品中心”选择“LiteBee Wing”，进入软件下载界面获取LitebeeGo。
安装完成
找到下载的安装包，右键以管理身份运行安装程序。
安装过程有杀毒软件，或者系统提示什么不安全，这个是正常，请放心，允许其安装即可。
选择电脑一个默认的位置安装即可，尽可能安装在英文目录下，中文目录软件有时候会出现奇怪问题或者报错。
LiteBee Wing软件使用
在安装软件过程中会自动安装相关驱动，在编程工具栏“机型”中选择对应的产品，在此选择LiteBee Wing进入到编程界面。
LiteBeeWing编程有两种方式。
其一，通过遥控器编程；
1）遥控器开机；
2）通过micro数据线把遥控器接入到电脑USB端口;
3）点击工具栏中“选择串口”选中识别的端口号（常见端口号COM3）,点击“连接遥控”，连接成功将提示“已连接遥控”;
4）遥控器按下中间的“0”开启在线模式；
以上，Litebee Wing开机状态下就可以进行编程操作，如果步骤不正确请按照提示信息操作。
其二，通过WIFI连接编程（要求电脑支持无线网）；
1)遥控器开机；
2)电脑搜索无线ID为LiteBee Wing_XXXX的设备;
3)点击工具栏中“连接WIFI”建立电脑与飞机的通信;
关于美国手（MODE2，左手油门）日本手（MODE1 右手油门）的操控切换有两种方式可以切换
其一，通过电脑刷写固件切换操作模式,此方式适用于遥控器固件升级。
1)遥控器关机；
2)通过micro数据线把遥控器接入到电脑USB端口;
3)点击工具栏中“选择串口”选中识别的端口号（常见端口号COM3），此时不要点击连接；
4)点击工具栏中“帮助”选择需要写入的模式固件（美国手（MODE2，左手油门）日本手（MODE1 右手油门））;
5)根据提示“先断开USB连接，关闭遥控器，重新接入USB”把USB接入电脑，接入之后进入程序烧录模式；
6)烧录进度条读完提示更新完成，同时遥控器蜂鸣器鸣叫提示。断开USB连接，关闭提示窗口即完成。
装配指引
飞行器装配指引
飞行控制器简介
飞行器结构介绍
飞行器灯语介绍
遥控器简介
遥控器介绍
遥控器指引（美国手）
LiteBee Wing充电
充电器使用说明
编程案例
通过编程控制无人机矩形飞行
拓展案例
LiteBee Wing结构拓展搭建
常见问题及解决办法
1.
问：电机不转问题？
答：检查电机接线是否可靠；检查电机线是否脱落；桨叶是否过压卡住电机；用手拨动电机检查是否存在较大阻尼，若存在电机已经损坏，需要及时更换电机。
2.
问：不能正常起飞？
答：A2:检查电机安装端子插线；检查电池电量；飞行前请校准飞行器。
3.
问：LiteBee Go编程不能识别遥控器？
答：首次使用需要在LliteBeeGo中安装遥控器驱动，安装完成选择的通讯端口要与设备管理器中识别设备端口保持一致。
4.
问：遥控器怎样从美国手切换日本手？
答：将遥控器通过数据线连接到电脑，在LiteBeeGo软件可以为遥控器下载日本手遥控器程序。
5.
问：编程积木无人机出现高频率射桨？
答：更换新的螺旋桨叶。
6.
问：编程积木无人机还可以负载多少重量？
答：建议在10g以内。
Litebee Wing拓展件
LiteBee Wing 巡线拓展模块说明书
LiteBee Wing 磁吸拓展说明书
LiteBee Wing 避障说明书
Drone:bit Kit
- The first drone assembled by yourself
The Exciting Drone:bit Kit
- The micro:bit Drone:bit Kit has successfully combined micro:bit with drones, which has provided another possibility for students to create and explore in the sky.
：Through your operation, you can give it commands of hovering at a fixed altitude , flying from a waypoint, curvilinear flight, and rolling in the sky etc. even in the classrooms, get your first professional micro:bit Drone:bit Kit now!
Drone:bit
- Optical flow locating, TOF fixing altitude
- It is a kind of drone in professional grade which is able to hover indoors in a waypoint , with build-in optical flow sensors in high sensitivity and TOF sensors, they help to hover and locate in a more precise way.
- DIY fun
- Assemble by yourself, enjoy the fun from DIY.
- Create your infinite artworks through coding
- Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
- Safe flying
- The sealed propeller guards give you a safe flying experience.
- Self-assembled Drone
- Assembled by yourself and enjoy the fun from DIY
- Programmable for More Projects
- Simple graphical and Python programming, available for complicated flying routines, flying gestures and rolling etc., there are more possibilities waiting to be explored.
- 120° Propeller Guards
- The sealed propeller guards make sure your drone fly safely.
- Available Flight in Classrooms
- Drone:bit could fly in the classrooms!
Spcification
Rated Voltage 3.7V Battery Capacity 800mAh Charging Voltage 5V Charging Current 0.8A Charging Port Micro-USB Power Protection Over Charge/Discharge Protection Propeller Guards Support LED 5 PCS (one for power indicator, four for status indicator) Waypoints Optical Flow Fixing Altitude Barometer + TOF Micro:bit Programming Support 2.4G Remote Control Mode Support Flying Time 8min
